Search Results

An AirGradient ONE box contains: 1x Fully-Assembled AirGradient ONE (Model: I-9PSL-DE) 2x Stands for AirGradient ONE (How to install the stands?) 1x 90-degree USB-A to USB-C cable (2m) 1x Thank You Card (QR code links to onboarding instruct...

Use a standard 5V, 2A USB power supply (not included). Most phone chargers meet this requirement. You will likely have one of these lying around your house from a smartphone or another device. Connect the USB-C end of the included cable to the AirGradi...

Prerequisites Before connecting your AirGradient ONE to WiFi, make sure you have: A Compatible WiFi Network Your WiFi network must meet the following requirements: 2.4GHz only (5GHz is not supported) Must have active internet No WPA Enterpris...

You can perform a factory reset by pressing and holding the BOOT button on the back of the device for about 10 seconds. Here’s a video guide: How to Perform a Factory Reset A countdown will show up on the screen. Please note that the data and settings...

There are two ways to add your AirGradient ONE to the dashboard. You can: connect the monitor to Wi-Fi first  or Follow this guide and add the monitor to the dashboard first. The order does not matter. However, the device will not send any data...

The AirGradient ONE comes with multiple mounting and cable-management options, making it a flexible air quality monitor that can be mounted on a wall or sat on a desk (using the included stands). The four holes located on the top, bottom, left and right of th...

Before continuing, make sure you have followed the Wi-Fi setup steps exactly as shown in the written instructions or video guides: Connecting Your AirGradient ONE to WiFi If the setup steps or videos were skipped, incomplete, or done in a different order, Wi...

Offline mode allows the AirGradient ONE to operate without connecting to Wi-Fi. Sensor readings remain active and visible on the display. No data is sent to the AirGradient dashboard while running in offline mode. How to enable Offline Mode Locate the BO...

The box contains: 1x Fully-Assembled AirGradient Open Air (Model: O-1PST) 2x Metal Zip Ties 1x 90-degree USB-A to USB-C cable (4m) 1x Thank You Card (QR code links to onboarding instructions) 1x Regulatory & Safety Insert  

Use a standard 5V, 2A USB power supply (not included). Most phone chargers meet this requirement. You will likely have one of these lying around your house from a smartphone or another device. Connect the USB-C end of the included cable to the AirGradi...

Prerequisites Before connecting your AirGradient Open Air to WiFi, make sure you have: A Compatible WiFi Network Your WiFi network must meet the following requirements: 2.4GHz only (5GHz is not supported) Must have active internet No WPA Ente...

 Here’s a video guide: AirGradient Open Air - Reset WiFi Configuration You can perform a factory reset by pressing and holding the BOOT button on the bottom of the device for about 10 seconds. The LED on the device will blink blue, indicating the devic...

This guide explains how to mount your AirGradient Open Air. Before mounting, we strongly recommend reading the placement guidelines. Bad placement = bad AQ data.  Once you’ve picked a good location, come back here to mount the device. Before installing the ...

Choosing a suitable location for your AirGradient Open Air is important for ensuring the measurements you see are meaningful and consistent with the surrounding environment. General placement recommendations Height and orientation A mounting height of a...

Before continuing, make sure you have followed the WiFi setup steps exactly as shown in the written instructions or video guides: Connecting Your AirGradient Open Air to WiFi If the setup steps or videos were skipped, incomplete, or done in a different order...

There are two ways to add your AirGradient Open Air to the dashboard. You can: Connect the monitor to WiFi first, or Follow this guide and add the monitor to the dashboard first. The order does not matter. However, the device will not send any ...